#Audioswitcher two system tray icons plus#

2 On the bottom of the switcher, ensure the configuration slide switch is set to A, the listening volume dial is set to 3 and the speaking volume dial is set to 2.

8ĩ Check configuration and make a test call 1 If your desk phone has a volume control, set it to mid-range. In this configuration, you must press both the headset button on your phone and the call control button on the headset to answer or end calls. USE NOTE If your phone has a built-in headset port, you should only use the headset port if you will not be using the HL10 lifter. NOTE Your desk phone handset will continue to work it s just hooked up differently. 3 Connect the remaining end of the telephone interface cable into the open handset port on the desk phone. 2 Disconnect the handset coil cord from the base of the desk phone and re-connect it to the telephone interface cable junction box. Desk phone (standard) 1 Connect one end of the telephone interface cable to the back of the switcher. If you will be using the Desk Phone + EHS cable, refer to EHS Getting Started guide that came with your EHS cable or at /accessories for installation instructions.

Desk phone (standard) Desk phone + HL10 lifter and power supply (sold separately) Desk phone + EHS cable (sold separately) NOTE If you will be using Desk phone (standard) or Desk phone +HL10 lifter and power supply continue below. Select one of the following and continue. 7Ĩ Desk phone: connect and call There are three set-up options for connecting the MDA200 to your desk phone. *For a list of supported headsets and wireless USB headset adapters see / support. 6ħ Connect your headset 1 Connect your Plantronics supported USB corded headset or wireless USB headset adapter to the MDA200 USB headset port.* NOTE Your headset will continue to function as if it were connected directly to the computer. See /accessories for more information on all accessories. 5 USB Extension Cable Extends the length of the USB cable between the MDA200 and computer. 4 AC Power Supply Required when using the HL10 lifter. Enables remote call answer/end with your headset.

3 HL10 Lifter Automatically lifts handset and returns it to the cradle. It allows others to know when you are on a call. 2 On Line Indicator (OLI) A light that flashes once a call is activated. 3Ĥ What s in the box Telephone interface cable MDA200 Audio Switcher 4ĥ MDA200 Basics FRONT/TOP BACK BOTTOM 1 Computer talk button 2 Desk phone talk button 3 USB headset/usb wireless adapter port (headset and adapter not included) 4 USB cable (connect to computer) 5 Handset lifter/ehs cable jack 6 Telephone interface cable jack 7 Power jack 8 Configuration slide switch 9 Listening volume dial 10 Speaking volume dialĦ Accessories Electronic Hookswitch Cable Electronically and automatically takes your desk phone handset off the hook. Please refer to the separate safety instructions for important product safety information prior to installation or use of the product. This guide contains instructions for setting up and using your MDA200 audio switcher.

#Audioswitcher two system tray icons plus#

2 Contents Welcome 3 What s in the box 4 MDA200 Basics 5 Accessories 6 Connect your headset 7 Desk phone: connect and call 8 Desk phone (standard) 8 Desk Phone Plus HL10 lifter and Power Supply (sold separately) 10 Desk Phone Plus EHS cable 12 Computer: connect and call 13 Connect your computer and place a call 13 MDA200 LED Indicators 14 Daily use 15 Answer an incoming call 15 Place an outgoing call 15 Switch calls 15 Troubleshooting 16 Desk phone 16 Softphone 17 2ģ Welcome Congratulations on purchasing your new Plantronics product.